ODI kissface Extraordinary 8 in One Skin Care Specialist
item no.:
K2-
Certificate:
Medical CE & ISO13485 -
Voltage:
110-220V, 50/60HZ -
Frequency:
2Mhz -
Energy:
1500W
Treatment Scopes
- Skin Cleaning: Pores, face, back and chest cleaning
- V-Massage: Accelerate blood circulation, release fatigue, V-face
- Product Introduction: Essence, serum, botox introduction by RF,Jet peel and needle-less injector
- Warm and Cool Hammer: Pores opening, stimulate products absorption and metabolism. Cool off skin, heat reduction after optical treatment
- Water Lock Moisturizing: Deeply moisturizing by steamer, sprayer
Advantages
- Multi-functional and economical 8 in 1 facial machine to meet all your needs
- Pores cleaning tip is manual control with a small hole, easy to clean and maintain
- Particular steamer with deep penetration, double nozzles and adjustable angle to promote pore expansion for better treatment result
- Needle-free injector, the best partner for hyaluronic acid and botulinum toxin introduction

Skin Cleaning
Pores, face, back and Chest cleaning
Product Introduction
Essence, serum, botox introduction by RF, Jet peel and needleless injector
Anti-aging
Eye bag, eye circle, wrinkle removal,Face lifting, tightening
V-Massage
Accelerate blood circulation, release fatigue, V-face
Cool & Warm hammer
Pores opening, stimulate products absorption and metabolism.Cool off skin, heat reduction after optical treatment
Water Lock moisturizing
Deeply moisturizing by Steamer, sprayer
Name | Kissface |
Treatment tip number | 8 treatment tips |
Power | 1260W(when water is boiling) |
Patter working mode | 1 to 8 |
Patter frequency | 1Hz to 10Hz |
RF frequency | 2Mhz |
Cool & warm hammer temperature | - 5 °C to 45°C |
Clean brush rotaing speed | 200 rpm |
Input VAC | AC 220V /50 – 60 Hz(AC 110V optional) |

Steamer
Given that the ionized vapor is abundant in oxygen ions, the vapor boosts the temperature level of the skin, quicken the neighborhood blood circulation, products oxygen as well as wetness to the skin cells, and also hydrates the skin. The consumer's skin is oily. When the vapor is splashed on the face, the skin cells skin comes to be swell, soften as well as pores increase. At the same time, heavy steam boosts nerve endings, advertises cell metabolic process, and also assists in the elimination of too much sebum.
Advantage
Ion atomization, deep hydration;A wider range of nebulization and a larger treatment range;
180° rotation of support arm and 360° rotation of treatment tips, more flexible operation;
The outlet temperature is 100℃, the thermal spray temperature is satisfied, and the effect is good.

Pore cleaning
Making use of the suction of unfavorable stress to draw away the oil blocked in the pores, it can deeply cleanse the face, get rid of termites and also oil deposits, and also make the pores a lot more comfy.
Advantage
Quartz glass material, more comfortable, no tearing.
User-friendly design, flexible suction control.
Strong cleaning, 6 times better than hand cleaning.

Patter
Easy for operation, no stress to the skin.
Gentle massage,more comfortable and flexible
Advantage
Making use of the unfavorable stress suction and also launch setting, the skin is conveniently looked after rhythmically, no injury to skin horny

Clean Brush
High quality rayon material, durable and suitable for all skin type.
The effect of brush cleaning is more effective than hand cleaning.
Advantage
Outfitted with 2 brush heads, pick brushes with various sizes according to utilizing on various parts of the body; After usage, cleansing and also sanitation, they can be recycled.

Needleless Injector
Non-invasive, safe and painless.
Best partner of Hyaluronic acid, Botox, serum etc. introduction.
The user-friendly design, smart selection for the dose, time and frequency according to different patients.
.
Advantage
Safe and non-invasive;
Treatment comfort;
easy to use

Jet Peel Sprayer
More delicate spray, greatly enhance the absorption of product.
Apply to different products
Advantage
Flexible switch control;
The hand-piece is more suitable for the grip of both hands and is convenient for operation;
The spray is finely made, which is better absorbed by the skin;
With high spray force, more product can be injected into the base layer.

Unipolar RF
Safe, comfortable, no tingling.
2Mhz RF with stable energy output.
Combine with your product, achieve double effect.
Advantage
Single-stage superhigh frequency, temperature level excitement gets to the dermis layer as well as the thermal result gets to 55-65 ℃, the impact is much better; Unfavorable clamp style, can be straight secured to the wrist, simple to run, fashionable look; Make use of any type of item with each other to open up the skin absorption network and also enable even more nutrient service to be infused right into the skin.

Cool & Warm Hammer
Quick switch between two working modes.Good partner of optical device treatment.
Via the take care of, the temperature level of -5 to 45 levels is constantly provided, which acts upon the skin. When the temperature level is Less than the skin temperature level, it can diminish the pores and also secure the nutrients. When the greater temperature level is utilized, it can boost the regrowth of collagen in the dermis, attaining firming and also anti-aging impact.
Advantage
Stable temperatureThe warm and cool switch quickly.
- First check whether the power switch of the instrument is in the off state (press to the off state), then firmly insert the power cord into the AC socket of the host, and then firmly insert the power plug into the socket;
- When using steam spray, please do not suddenly change the angle of the steam head, arm and touch the vicinity of the steam nozzle to avoid the danger of burns;
- Do not touch the heating part (kettle);
- Do not use tap water as a thermal spray, distilled water or purified water can be used;
- The distance between the steam outlet and the customer’s face should be 35~40cm, not too close to avoid scalding;
- Except for adding water to the water tank, it is forbidden to open the water filling cover to avoid the danger of scalding;
- When the water tank needs to be cleaned after the operation, please clean it more than 60 minutes after using to ensure that the water in the water tank is not hot.

Water tank

Add kettle

power cable

Clean handle cable

Massage cleaning cable

Cold hammer

Brush head connection line

Electric ion connection line

Sprayer connection line

Brush head

Import instrument

Spray bottle

Negative pressure cleaning treatment

Massaging

Needle-free water gloss

Massage cleaning head
First put a section of the hose connected to the treatment head above the hanger, and then insert the connecting tube parallel to the PATTER connection.

Spray bottle
First connect one end of the hose to the spray bottle, place the spray bottle on the hanger, and then insert the connecting tube parallel to the SPARY connection.

Clean the handle
First put a section of the hose connected to the treatment head above the hanger, and then insert the other end of the connecting tube parallel to the KISSING connection.

Cold temperature hammer
First put the cold temperature hammer on the top of the hanger, and then insert the connecting pipe parallel to the COOL&WARM connection.

Cleaning brush
First install the brush head, align the brush head vertically with the handle interface, pull down the silver metal part of the handle interface and insert the brush head onto the hanger, and then insert the connecting pipe parallel to the BRUSH PEELING connection.

RF head
First connect the negative clamp and the lead-in instrument, the white end is connected to the lead-in instrument, the gray end is connected to the negative clip, after the connection is made, put the negative clip and the lead-in instrument on the top of the rack, and then insert the connecting tube parallel to the IONIC connection.

Water tank
First install the water tank of the sprayer, pick up the water tank and connect it to the instrument. Place the water handle on the right side. After alignment, you need to rotate the handle to the middle, then knock down the valves on both sides to lock it, and then open the cover on the water tank. , Use a kettle to add water to more than two-thirds.

- 1.Thermal spray time display area.
- 2.Adjust thermal spray time button.
- 3.There is no water in the hot spray tank, or the water level is too low, an alarm will be displayed.
- 4.Thermal spray button, click to start spray.
- 5.Click to start boiling water.
- 6.Tap to reduce energy, frequency or suction.
- 7.Start/pause;
- 8.Click to increase energy, frequency or suction.
- 9.Watering can or blackhead treatment head selection button. After clicking, the two icons above the button will light up at the same time. You can choose either watering can or cleaning head to use.
- 10.Pa Pa Pa massage treatment head selection button, after clicking the button, the icon on the left side lights up (the frequency of negative pressure can be adjusted at this time), click the button again, the icon on the right side lights up (the suction power can be adjusted at this time).
- 11.RF treatment head selection button.
- 12.The cleaning brush selection button, click the button on the left side of the icon to light up (the cleaning brush rotates clockwise), click the button again, the right icon to light up (the cleaning brush rotates counterclockwise).
- 13.The hot and cold hammer selection button, after clicking the button, the icon on the left side lights up (the heating mode is turned on), click the button again, the icon on the right side lights up (the cooling mode is turned on).
- 14.Needle-free water light adjustment area.
- 1. Remove makeup and clean face, take pictures before surgery.
- 2. Remove the metal jewelry on the surface of the customer's body (watches, necklaces, earrings, rings, etc.).
- 3. Clean the skin with a brush first.
- 4. After cleansing the skin, the distance between the steam outlet and the customer’s face should be 35~40cm when using the steam hot spray. At the same time, you can apply blackhead drainage liquid on the nose (10~15 minutes).
- 5. Remove the blackhead outlet liquid patch, and select the suction treatment head to suck the blackhead while hot spraying.
- 6. Massage and soothe the skin with a papa treatment head for about 5 minutes.
- 7. The radio frequency treatment head introduces products to lift and tighten the skin for about 10 minutes.
- 8. Finally, use a hot and cold hammer to open and shrink pores.
- 9. Precautions after surgery.
Front breast cleaning (optional)
purpose:
Clean the oil on the front chest and remove excess horny, thereby improving the problem of enlarged pores and acne; and it can promote skin metabolism, keeping the skin healthy and delicate.
Technique:
Starting from the client’s shoulder, make a circle (3~5 circles) according to
the rotation direction of the brush; then wash 3~5 times from the shoulder to the neck, then wash from the right
chest to the left in a spiral manner, back and forth 3~5 Times; the last same way to operate the left.
(According to customer needs, the entire appeal procedure can be repeated
1~3 times)
Precautions:
- 1: Choose a large or medium brush head for the brush;
- 2: Before using the brush, you can apply the facial cleanser to the treatment area in advance and moisten it with water;
- 3: If the environment is relatively dry, you can add some water in time during the operation.

Facial cleansing
purpose:
Deep cleansing of facial oil, aging keratin and other impurities, to clean facial skin pores, improve large pores; also improve the phenomenon of acne caused by excessive oil.
Technique:
Starting from the center of the eyebrows of the client perpendicular to the hairline, move to the right in a Z-shape to the end of the eyebrows and slide to the chin, from the chin
Follow the facial contour line and move to the right to the lower eye corner in a Z-shape (the operation on the right is completed, you can repeat 3~5 times);
Then use the same method to operate the left face 3~5 times, and then wash the chin and neck area, also 3~5 times.
(According to customer needs, the entire appeal procedure can be repeated
1~3 times)
Precautions:
- 1: Choose medium or small brush head for the brush;
- 2: Before using the brush, you can apply the facial cleanser to the treatment area in advance and moisten it with water;
- 3: If the environment is relatively dry, you can add some water in time during the operation;
- 4: Be careful not to touch the eyeballs, mouth and nostrils during operation;
- 5: According to the customer's skin condition, choose a suitable facial cleanser. If the customer's skin is sensitive, they need to use a mild and non-irritating facial cleanser to prevent customers from being allergic to facial cleanser;

Deep cleansing of skin
purpose:
Deeply cleans pores, blackheads, oils and acne, so that pores are clean and pores become thinner; it can improve the problems of large pores and uneven skin tone.
Technique:
The operator's finger presses the negative pressure hole on the side of the treatment head. At this time, the treatment head will have suction force. Use the sliding technique to slide and absorb the skin in the order of nose, lip, chin, eyebrows, and upper brow bone to clean the pores. When you want to leave the skin, remove your finger from the negative pressure hole and then lift the treatment head.
(According to customer needs, the entire appeal procedure can be repeated
1~3 times)
Precautions:
- 1: Before treatment, the thermal spray function of the instrument needs to be warmed up in advance;
- 2:Apply blackhead drainage solution to the treatment area for at least 10 minutes in advance;
- 3: When applying the blackhead export liquid, you can choose the thermal spray function to use together, and the blackhead will be better softened;
- 4: During treatment, the thermal spray function needs to be used at the same time, the effect is better;
- 5: Blazes may appear on the skin, which is normal, and usually disappear on their own within 1 to 3 days;

Soothing skin massage
purpose:
Soothing massage promotes skin metabolism and speeds up blood circulation.
Technique:
The operator presses the negative pressure ports on the sides of the two
treatment heads with the fingers of both hands at the same time, and simultaneously increases the hand sliding
operation along the facial contour line with the suction and release frequency.
(The whole step is about 5 minutes)
Precautions:
- 1: Before operation, apply a layer of lubricating product (essential oil or moisturizing product) on the skin surface;
- 2:It can also be operated with thermal spray without applying the product, using the water vapor attached to the skin surface to slide the thermal spray.;
- 3: Be careful to avoid the upper eyelid during operation;

- 1. Thermal spray: only pure water or distilled water can be used.
- 2. Washing brush: facial cleanser.
- 3. Negative pressure cleaning head: blackhead outlet liquid.
- 4. Radio frequency head: Import function: hyaluronic acid, vitamin C, vitamin E, tranexamic acid, arbutin, tranexamic acid and other nutritional products; if it is to enhance function: radio frequency cream, gel, essential oil, etc.; accelerate skin metabolism function: radio frequency Creams, gels, essential oils, etc.
- 5.Needle-free water: hyaluronic acid, vitamin C, vitamin E, tranexamic acid, arbutin, tranexamic acid and other nutritional products.
- 6. Watering can: purified water, normal saline, growth factor, vitamin C nutrient solution and other products.
- 7. Pata massage head: none.


-
Freezing Painless 808nm Diode Laser Permanent Hair Removal Machine
-
1200w Professional 808nm diode laser hair removal machine for sale
-
Portable nd yag laser q switch tattoo removal machine price
-
Infrared+RF+Vacuum Roller Fat Removal Massage Machine With CE
-
Professional E-light IPL Machine For Hair Removal & Skin Rejuvenation
-
Scar removal and vaginal rejuvenation fractional co2 laser beauty machine
-
Portable non invasive liposuction fat removal machine
-
3 in 1 Elight OPT IPL RF Laser Multi-functional Beauty Machine